Position: Home > News Center > FAQ > Detalles

Arc deviation

gdzhxc.com     2021-11-01     369

Cause Analysis:

1. The tungsten electrode has pores; 2. the tungsten electrode is split; 3. the arc starting current is set too large.


1. Cut off the tip and sharpen it again; 2. Cut off the split and sharpen it or replace it with a new tungsten electrode; 3. Set the arc starting current to about half of the upper limit of the working current.

+86 137 9435 5458 gdzhxc@163.com Leave Message
HOME About Us Products FAQ News Contact Us Inquiry 中文